Gate Engineering Blog
Practical notes on planning, specifying and maintaining automatic bifold gates.
2026-11-06Bifold Gate vs Swing Gate: Clearance, Speed and UpkeepA swing leaf needs open ground equal to its own width; a bifold folds into a short stack by the post. Here's how that one difference plays out on slopes, in wind, at the curb and over years of use.
2026-11-06How to Measure a Driveway for a Bifold GateA bifold gate is only as good as the numbers it was drawn from. Here's what to measure on your driveway, how to measure it, and what to send so the quote comes back right the first time.
2026-11-06Why Bifold Gate Hinges Sag, and How a Top-Bottom Axis Avoids ItMost sagging starts with where the weight goes. Here's how side hinges get overloaded on a bifold gate, and how a top-bottom axis changes the load path.
2026-11-06Folding Gates for Coastal Properties: Materials That Survive Salt AirSalt air finds the weakest part of a gate, not the prettiest. Here's how to choose between SS316 stainless and coated aluminum for a seaside villa or marina folding gate.
2026-11-06What to Look For in an Automatic Bifold Gate MotorThe motor decides how your bifold gate behaves every single day. Here are the specs worth checking, from voltage and gear ratio to leakage protection and warranty terms.